In fact, different stamping parts materials have different strength, toughness and wear resistance during the working process of the cold-formed forming machine. Under certain conditions, the use of advanced materials can increase durability several times. Therefore, in order to improve the durability of stamping parts, good materials must be selec
Corporate Restructuring The world’s major automobile companies have reformed their supply systems and implemented global production and global procurement, that is, from purchasing from multiple auto parts manufacturers to purchasing from a few system suppliers; from single auto parts procurement to module procurement; from implementing dome
1、Before working, you must wear work clothes, tie your cuffs, no scarves, and gloves are strictly prohibited. Female students should put their braids in their hats. 2、Check the protection, insurance, and signal devices on the equipment. The mechanical transmission part and the electrical part must have reliable protection devices. Whether the wo
The plastic mold is composed of a movable mold and a fixed mold. The movable mold is installed on the movable template of the injection molding machine, and the fixed mold is installed on the fixed template of the injection molding machine. During injection molding, the movable mold and the fixed mold are closed to form a pouring system and cavity.
The plastic Bumper Stop is composed of three parts: an outer panel, a cushioning material and a beam. The outer plate and buffer material are made of plastic, and the cross beam is stamped with a cold-rolled sheet with a thickness of about 1.5 mm to form a U-shaped groove; the outer plate and buffer material are attached to the cross beam, and the
